Product Categories
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>

Dustless Wet Sand Blasting Pot

Dustless Wet Sand Blasting Pot

Wet sand blasting pot used in precision molds, electronic parts, piston rings, aviation parts, titanium Pieces of surface pretreatment, circular saw blades and oil cleaners. Features: 1. Can use ultra-fine abrasive for precision work-piece surface treatment; 2. Sandblasting liquid recycling, low...

Features

Wet sand blasting pot used in precision molds, electronic parts, piston rings, aviation parts, titanium
Pieces of surface pretreatment, circular saw blades and oil cleaners.
Features:
1. Can use ultra-fine abrasive for precision work-piece surface treatment;
2. Sandblasting liquid recycling, low consumption of sand, nozzle wear is small, low cost of production;
4. Simple operation, less failure rate;
5. Clean the heat treatment parts, welding parts, castings, forgings and other surface oxide scale, cleaning quality can reach Sa3 level
6. Micro-burrs, surface residues, and the like
7. The roughness Ra value of the work-piece surface can be increased or decreased within a certain range
8. Change the stress state of the work-piece surface, can improve the wear resistance and fatigue strength of parts
9. To improve the movement with the occasional lubrication conditions, can reduce the movement with the occasional movement of noise, etc .; can also be used for renovation of the old pieces.
working principle:
Pressure-type sandblasting system is the water, abrasive storage in the sand tank, compressed air through the air regulator and the total control of the ball into the sand tank, so that the formation of pressure inside the closed sand tank. Open the control of the gun switch, water, abrasive, compressed air through the bottom of the flange after mixing into the sand pipe, and then sprayed from the nozzle high-speed, fired processing surface.
Adjust the amount of sand control valve can change the size of sand.
After the abrasive is used up, close the control of the gun switch, turn off the gas control valve, open the sand tank on the exhaust ball valve, the tank of compressed air exhausted, from the new water, plus abrasive recycling.




Hot Tags: dustless wet sand blasting pot, sand blasting pot, wet sand blasting machine
E-mail to us
Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.