News
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>
Home > News > Content

Catenary Type Shot Blasting Machine The Characteristics Of

QINGDAO KNNJOO MACHINE INC. | Updated: Jun 06, 2017

Catenary Type Shot Blasting Machine The suspension chain-type shot peening machine has the following characteristics:

The suspension chain-type shot blasting machine has the characteristics of advanced design, reasonable structure, reliable operation and high production efficiency.

Second, the machine with the help of PLC electrical control, projectile controllable gate and projectile transport, such as fault detection, the realization of automatic control of the machine, which has high production rate, good reliability and advanced degree of automation and other characteristics.

III. The shot-peening chamber is welded into a box-shaped structure with high strength without vibration. Shot-Blasting room in the hot zone of the use of ZGMN13 Guard plate, Catenary Type Shot Blasting Machine in the wear-resistant, bullet-proof shot in the performance of a great improvement in life expectancy of up to 17,000 hours.

IV. The dedusting system adopts the most advanced pulse-type reverse-blowing dust remover in the world, and fully meets the requirements of modern environmental protection. The effect of dust removal conforms to the requirements of the comprehensive emission standard of air pollutants.

Five, the use of domestic highest market retention rate, big shot blasting volume, Gao shot speed of the Qu3415 cantilever centrifugal shot blasting device, Catenary Type Shot Blasting Machine can significantly improve the cleaning efficiency and labor productivity, to ensure the cleaning effect. The symmetrical arrangement of the ejection belt can make the workpiece hit by a more comprehensive and gentle projectile, which can not only achieve the ideal cleaning effect, but also guarantee the workpiece will not be variant. One shot and two rebound projectiles to improve the utilization rate of projectile, so that the projectile cover uniform.

Six, the workpiece bearing body using the gantry structure, can ensure that the workpiece in the suspension chain hanging free continuous transmission, the maximum to meet the workpiece cleaning requirements and operation safety.

Seven, separator using full curtain type separator, Catenary Type Shot Blasting Machine separation effect is good. The separation efficiency of pill, slag and dust reaches 99%.

Eight, the use of advanced three-level sealing protection methods, sealing effect is good.

Nine, the workpiece transportation adopts step-by-pass, the user can adjust the shot blasting time according to the request of the different workpiece, in order to control the productivity and the quality of cleaning. The workpiece can be continuously carried out, two-position shot blasting cleaning, unloading material. Users can save a lot of manpower, material resources, ahead of the construction cycle, Catenary Type Shot Blasting Machine save energy consumption.

Ten, the hook Walk Trough uses the advanced flexible steel core rubber plate, the nylon brush, the gas control pulls the cover board three level seal protection way, Catenary Type Shot Blasting Machine the seal effect is good.

The suspension chain-type shot blasting machine is mainly suitable for the shot peening of large batches of workpieces. From the structure form, generally can be divided into Q38 series continuous pass type, Q48 series Common catenary step pass, Q58 series product put chain type etc. Its working principle is that the workpiece with the chain can be continuous operation, step-run, or the use of advanced product-push-pull catenary conveyor, so that the workpiece in the loading and unloading materials and shot blasting zone respectively in a stop state, Catenary Type Shot Blasting Machine to achieve fixed-point loading and unloading and point shot blasting process, according to different workpiece can be single point hanging Heavy 50 2000, and high production rate, reliable operation, the various types of easy to hang parts of the bulk cleaning, very suitable such as engine cylinder head, motor shell, Catenary Type Shot Blasting Machine gear, motorcycle engine shell, locomotive hook and tail box assembly, bogie assembly, hardware tool shell, water pump, etc. cleaning effect is preferred. Is the automobile, tractors, diesel engines, motors, valves and other industries ideal choice. Generally can be designed according to user product requirements.


Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.