News
Call us on
+86-532-81913999
If you have any questions, please contact us
GO >>
Home > News > Content

Hook Type Shot Blasting Machine Cleaning Equipment

QINGDAO KNNJOO MACHINE INC. | Updated: Sep 25, 2017

Hook type shot blasting machine as a standard model of the shot blasting cleaning machine, the working cylinder from 900 to 1300 mm diameter, height from 1300 to 3500 mm. The standard machine with 2-7 throw the head and the biggest load of 10000 kg, and this kind of shot blasting machine is of very high production efficiency, flexibility of span is also quite big, is the ideal blasting equipment, and easy to operate, just going to deal with the workpiece loading machine, press the start button, after a short time (usually for 5 to 7 minutes), to complete the whole process of cleaning, remove all dust and residual material, mainly suitable for all kinds of medium and large casting, forging, welding, heat treatment parts surface treatment, including fragile and irregular shape of the workpiece. It is suitable for the surface cleaning or strengthening of the forging parts and riveting parts of the multi-variety, medium and small batch, especially for the surface cleaning or strengthening of the thin thin-walled parts. It is able to in the original state of steel surfaces with powerful shot, rusty spot and remove the surface welding slag and scale to obtain a certain roughness uniform of metallic surface, to remove the stress, improve the quality of steel surface coating and anticorrosion performance.

merit

1. It can significantly improve the cleaning efficiency and achieve satisfactory cleaning quality by using the large projectile volume and the high projectile speed BMD shot blasting device.

2. Simulated projectile figure (including blasting ware number, number and layout of the space position determination, etc.) and all the drawings are shot blasting machine completely using computer aided design (CAD), the selection of shot blasting machine and the layout is more reasonable. The utilization rate and labor productivity of the projectile are improved, the cleaning effect is guaranteed, and the wear of the body armor plate is reduced.

3. Adopting the popular form of pit structure, which saves the construction cost and time of the pit foundation, and solves the southern application

The problem of the granule sand corrosion in the elevator is caused by the water storage in the hole.

4. Clean indoor hot rolling Mn13 board protection, compared with the previous rubber protection, its service life is greatly improved, and good appearance, easy to change, is the most popular way of cleaning machine room body protection.

The cleaning machine is suitable for surface cleaning or reinforcement of casting, construction, chemical, motor, machine tool and other industries. It is especially suitable for surface cleaning and blasting reinforcement of castings, forgings and steel structural parts of multiple varieties and small batches, to remove the small amount of sand, sand core and scale of the workpiece surface. Also suitable for surface cleaning and strengthening of heat treatment parts; It is especially suitable for thin, thin - walled parts which should not be colliding.

Hook type shot blasting cleaning machine cleaning equipment for the hook type, by the blast cleaning chamber, screw conveyor, hoist, separator, two shot blasting machine assembly, the projectile control system, hook walking track, hook system, rotation device, foundation, dusting system and electrical control part, etc.

Shot cleaning chamber

The shot blasting room is composed of the chamber shell and the guard board. The dust removal port is set on the back wall. The shell of the shot blasting chamber is the welded structure of steel plate and shape steel, which is the sealing and spacious operation space for the workpiece to be cleaned and cleaned. The side wall of the shot blasting room is equipped with two sets of QX30 pellet assembly, which guarantees the cleaning of the workpiece. ZGMn13 of ZGMn13 with a thickness of delta 12 was used in the area in which the projectile was directly projectile in the chamber, and 65Mn plate was used in other areas. Protect plate is pressed tightly with protective nut, easy to remove and replace when necessary. The lower part of the chamber is formed by a steel plate around the hypotenuse to form a funnel that causes the projectile to flow into the bottom spiral conveyor. The steel plate is also covered with a protective plate. In the upper part of the spiral conveyor, there is a steel leakage board, and the upper part of the leakage board is a wear-resistant rubber plate. When used, the wear-resistant rubber plate should be in front of the shot blasting device to protect the steel plate below and extend its service life. The standard configuration is manually open and closed. The machine is designed to open the door, the inside of the gate is covered with wear-resistant rubber, and the steel pressure plate and hexagon special nut are pressed. Foam rubber strip is adhered to the surrounding area to effectively seal the door. The lower part of the capsule, which will open the door, can prevent the projectile from falling to the ground and injuring the person. Oil cups are provided on the front door of the gate to lubricate the bearings on the front door.


Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.