News
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>
Home > News > Content

Shot Blasting Machine - Applications

QINGDAO KNNJOO MACHINE INC. | Updated: Mar 03, 2016

There are numerous applications of shot blasting machines.

The first and foremost application is cleaning of castings to remove loose and burnt sand and scale from ferrous and non-ferrous castings. 
Shot blasting process reduces porosity and increases pressure with standing capacity of aluminium and many other non-ferrous castings. 
Beside this, shot blasting is used for cleaning of forgings, heat-treatment scale and surface of steel structures. 
It is used for surface preparation prior to operations like welding, electroplating, galvanizing, metalliczing, enameling, rubberizing, glass coating, glass etching, shot peening and many other special applications. Green Sand Moulding is the most popular moulding technique used in foundries. About 90% of foundries use this technique. A large amount of sand sticks on the surface of the castings, which has to be removed by shot-blasting. Moulds/cores made by other processes like CO2 Silicate etc. also leasve some sand sticking to the cast surface. Shot blasting is needed to remove this sticking sand to clean the casting surface.

Typical mass produced castings are pump casings, impellers, valve bodies as well as automotive and tractor components like brake-drums, cylinder blocks, cylinder heads, housings, fly wheels, manifold covers etc. These weigh from 5 kgs to 60 kgs or more. To clean these castingsit takes 7 to 10 minutes using S-550 (1.4 mm) size shot. Some other types of castings when hung on monorail, take 15-20 minutes for a lot of 500 kgs or more.

A large number of European and American foundries use No-bake process, Lost Wax process and Lost-Foam process for moulding. THere is very little sand sticking on such castings. Hence maqny overseas shot blasting machine manufacturers may not understand the typical requirement of Indian foundries, and as a result they may not be able to meet guaranteed output at lowest possible operating cost. The costs of overseas machines are 3 to 4 times more than that of Indian machines.

Many imported machines have cartridge filters instead of bag filters. The disadvantage of a cartridge filter is that in humid atmosphere sand sticks to the paper. It cannot handle heavy sand load. As a result it chokes frequently. Imported machines may not give any production advantage and their spare parts cost may also be very high.

Properrly designed shot blasting machine will not only clean the castings efficiently, but will also satisty the users’ quality needs and also assure optimum productivity at the lowest possible operating cost.

Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.