News
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>
Home > News > Content

Steel Bar Shot Blasting Machine The Adjustment

QINGDAO KNNJOO MACHINE INC. | Updated: Jul 03, 2017

1, Steel Bar Shot Blasting Machine from the shot blasting machine feeding management. Through the type of shot blasting machine debugging is completed, they start the process debugging. Shot blasting machine for the first time after the feed, the ball control pipeline to control the valve to the maximum, Steel Bar Shot Blasting Machine start the device to continue feeding, when the shaking machine current is basically the same, that the pellets full, stop feeding.

2, the adjustment of the blasting machine. After feeding, Steel Bar Shot Blasting Machine start the process debugging. Will be prepared for the workpiece shot blasting, Steel Bar Shot Blasting Machine according to the shot blasting machine on the surface treatment of the workpiece, Steel Bar Shot Blasting Machine a slight adjustment of the direction of the set of shot blasting machine, adjusted to the workpiece can be processed to each surface. Through the trial production to determine the best direction, marked with a marker pen, Steel Bar Shot Blasting Machine the future, such as the production of no major changes in the workpiece, you do not need to adjust.

3, the shot blasting machine current (pellet flow) to control the management. The greater the flow of pellets, the faster the cleanup. As the pellet flow can not be displayed, Steel Bar Shot Blasting Machine so through the type of shot blasting machine motor current to show the greater the flow of the ball the greater the current, process management control of the current. Current is one of the important parameters of the shot blasting machine, it depends on the number of pellets and the control of the pipeline control valve. Steel Bar Shot Blasting Machine From the perspective of the use of through-type shot blasting machine, the current should not be too high, without the consent of the technician is not allowed to adjust.

Through the type of shot blasting machine is a shot blasting equipment, Steel Bar Shot Blasting Machine one of the equipment should be installed in accordance with the smooth and orderly, ready to install before doing.

4, the shot blasting machine speed (pellet initial speed) control management. The larger the initial velocity of the pellets, the faster the cleaning speed, but the initial speed will lead to deformation of the steel plate thickness thin stamping parts. Therefore, the initial speed is controlled by its motor speed. Steel Bar Shot Blasting Machine For the steel plate thickness of different parts of the mixed production of shot blasting line, if conditions should use the inverter, by adjusting the motor speed to adjust the initial velocity of the pellets. Steel Bar Shot Blasting Machine On the steel plate thickness of the workpiece, the use of low-speed shot blasting, to avoid deformation of the workpiece.

In the process of shot blasting machine should try to place more parts in the projectile area, which can improve the cleaning efficiency and can reduce the wear and tear of the guard, Steel Bar Shot Blasting Machine to increase its service life. 2, in the case of the workpiece can not increase, should adjust the orientation of the cast steel shot to do the most amount of the projectile in the workpiece, which can also increase the life of the shield to reduce its wear and tear. 3, ① dust removal system should be adjusted throughout the gate, Steel Bar Shot Blasting Machine so that the wind distribution is reasonable, can enhance the dust effect. ② dust collector should ensure regular cleaning. What is the shot blasting machine, what is the use of the trolley-type shot blasting machine is used to cool the castings after the box is cooled to below 30 ℃ into the trolley with large shot peening high-speed rotation of the shot blasting device to accelerate the projectile 80 m / s or so speed, throwing to the surface of the casting, clean the cavity can be used to clean up the cleaning, cleaning under the core sand, due to high-speed projectile attack, Steel Bar Shot Blasting Machine and then by the separation and dust and regeneration, magnetic Can still be used after. The machine for 5 tons of castings below the sand cleaning and forgings, structural parts, heat treatment and strengthening. There are crawler type, drum type, hook type and other types of shot blasting machine, similar use to meet the requirements of various processes.


Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.