Product Categories
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>

Low Nois Cleaning Machine Rotary Table Shot Blasting Machine

Turntable Shot Blasting Machine is suitable for surface cleaning and strengthening of steel structural parts and casting ,and is especially suitable for surface rust removal and cleaning of surface sc

Features

The Rotary Table Blast Machine is  divided into single rotary table shot blasting machine and double rotary table shot blasting machine.

Rotary Table Blast Machine is suitable for surface cleaning and strengthening of steel structural parts and casting ,and is especially suitable for surface rust removal and cleaning of surface scale of thick billet steel.
Rotary Table Blast Machine is widely used in foundry ,forging,mechanical and steel industries.
Rotary Table Blast Machine is suitable for surface rust removal and strengthen of engine connecting bar, gear, shell cover wall, clutch friction part.

Summary of Rotary Table Blast Machine :  
Rotary Table Blast Machine: compact structure, small space required, low noise, no leakage,  easy installation and maintenance.
Rotary Table Blast Machine includes dust collector, separator, cartridge filtration system and soon on.
Rotary Table Blast Machine  has no special foundations required, no extra ducting needed
Rotary Table Blast Machine  is equipped with full safety interlocks.
Rotary Table Blast Machine  is a automatic machine in operation.
Rotary Table Blast Machine , Table blast,
Rotary Table Blast Machine  structure is simple, small footprint, easy to use and reliable.

Technique  parameter:

MODE

EFFECTIVE VOLUNE

FEEDING AMOUNT

TOTAL BLASTING CAPACITY

TOTAL POWER

ZJ012

1350*560MM

1200MM/400KG

7.5KW/180KG*2

22KW

ZJ025

2654*560MM

2500MM/1000KG

11KW/240KG*2

39.2KW

ZJ015S

1800*750MM

1500MM/650KG

15KW/270KG*2

42.2KW

ZJ044J/E/F

1700*1050MM

350MM/200KG

15KW/270KG*2

47.4KW

QZ365/QQZ765

2700*1300MM

2500MM/5T

18.5KW/300KG*4

101.5KW

QZ3630/QZ7630

3300*1550MM

3000MM/30T

18.5KW/300KG*4

117.4KW

QZ3650/QZ7650

5000*2245MM

4850MM/50T

22KW/360KG*5

152.3KW

QZ7680-QZ76510

Non-calibration

Non-calibration

22KW/720KG*6

According to the technical requirements

Applicable to the casting and forging and heat treatment workshop clean flat, thin wall, afraid of collision parts surface adhering sand oxide attachments. By blast cleaning, not only can remove surface rust, clean out various parts of corrosion, dirt, etc., improve the surface quality of the workpiece; at the same time, but also can improve the workpiece internal stress, strengthen the purpose to improve the work of the anti fatigue strength.

This machine mainly has the following characteristics: shot blasting chamber body and shot blasting machine arrangement through computer simulation of 3D dynamic ejection determine, enable the flow of projectiles thrown the coverage area of accurate coverage on the surface of the workpiece, the projectile from the direction of each of the workpiece simultaneously thrown to the surface of the workpiece. By Swiss +GF+ technology high ejection speed direct linking centrifugal type shot blasting device, can significantly improve the cleaning efficiency, satisfied with the quality of cleaning machine has the advantages of novel design concepts, compact structure, use and maintenance convenient.

Operation:

The equipment is equipped with the electric control box SIEMENS, in order to adjust the equipment to adjust the equipment, the operator can start the functional unit in sequence.

And do not operate in order to test the performance of the relevant parts, running the situation

The part between the electrical components of the interlock. Ensure the blast, maintenance, shot blasting machine cannot work, ensure the safety of operators

The function of the failure of the system of the bullet is the failure of any part of the system, and its upper part is automatically stopped running, and the ball is dead and burned down by the bullet proof pill.

By our company independently developed sealing type gas control projectile gate valve, which is a kind of rely on controlling stroke, shot blast capacity of regulating device, which avoids the due to common projectile control valve is not tightly closed due to caused by the motor burned and shot is blocked, the projectile throwing and wounding phenomenon, reached the international advanced level nineties

Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.