Product Categories
Call us on
+86-532-81913999
If you have any questions, please contact us
GO >>

Good After-Service Steel Belt Shot Blasting Machine

The machine adopts the endless STEEL BELT apron to form a special barrel, and make the work pieces tumble continuously during shot blasting process.It is mainly used in forging work pieces and metal w

Features

The machine adopts the endless STEEL BELT apron to form a special barrel, and make the work pieces tumble continuously during shot blasting process.
It is mainly used in forging work pieces and metal work pieces. The machine can be used not only as a single machine, but also as a part of a line.
Tumble belt type shot blasting machines are used to clean casting, forgings, stampings of crisp workpiece and surface adhering sand, rust layer of oxide, burrs of non-brittle parts.

Classification:
Item NO: 15GN Steel belt shot blasting machine with Automatic Feeding And Vibrator Conveyor
Item NO: 28GN Steel belt shot blasting machine with Automatic Feeding And Vibrator Conveyor
This machine is used of fore and aft phase rubber tracks the formation of the drum of a space, make the workpiece in the process of blasting continuous rolling, it is mainly used for non-ferrous metal artifacts such as shot blasting treatment

Feature
1. no-pit, no change of track, compact structure
2. High impeller blasting volume
3. High cleaning efficiency, large effective space
4. No-pit form, has no special demand on structure of work piece
5. Suitable for machinery manufacture and foundry industry
6. With dust-collection device and separation device, can be operated easily and also with good condition
7. Convenient maintainance.

NoItemUnit3GN8GN-5R8GN15GN28GN
1Productivityt/h0.6-1.23.0-52-2.55-810-14
2Feeding amountkg20080060013003500
3Max. weight of single piecekg1015030250365
4Diameter of end diskmm6501000100010921245
5Effective volumecubic meters0.150.40.30.430.79
6Abrasive flow ratekg/min1202502504802X350
7Ventilation capacitycubic meters/h20006000350050006000
8Power consumptionkw12.632.624.35064
10Track typeBeltRubberRubberRubberMetalMetal

Working Principle:

Put the cleaning workpiece into the shot blasting chamber, and close the door, the machine starts, the workpiece is drum driven, and begin to roll, at the same time the shot form a fan-shaped beam by blast wheel high-speed blasting and uniformly blow on the surface of the workpiece. shot and grit from the holes on the belt flows into the bottom of the screw conveyor, fed into the elevator and sent them to separator for separation by the elevator. The dusty gas sent to the precipitator by the suction fan after filtration, change the clean air to the atmosphere, dust falls precipitator at the bottom of the dust box, the user may be periodically cleared by air blowback. Waste sand outflow by the waste pipe and it can reuse. Shot sand mixture recycling reuse pipe into the chamber body, to be separated separation and reuse; clean projectile by the for pill Gate into the blast wheel throwing wage pieces.

Choosing the best machine for you :

In order to give you the suitable Shot Blasting Machine , please provide below message for us :
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?)
4. The power supply you need ( Our China :380V, 3PH, 50HZ)
5. Better to send us the workpiece photo or drawing.
Welcome to contact us or visit our factory in Qingdao China.

Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.