Product Categories
Call us on
+86-532-86851699
If you have any questions, please contact us
GO >>

Qingdao Supplier Steel Plate Shot Blasting Machine

Steel Plate Shot Blasting Equipment are mainly used for treating long and/or flat components. The components continuously pass through the "pre"chamber, the blasting chamber, and the cleaning chamber

Features

Steel Plate Shot Blasting Equipment are mainly used for treating long and/or flat components.

The components continuously pass through the "pre"chamber, the blasting chamber, and the cleaning chamber on a special roller conveyor.

Highly efficient turbines fixed on the machine housing make the Steel Plate Shot Blasting Machine possible to treat the components on all sides.

Automatic conveyor sand blasting machine are used to remove scale, rust and paint from long and/or flat components.

Technical Parameters:

Technical parameter of Shot Blasting Machine
No.ModelItemQ698Q6912Q6915Q6920Q6925Q6930Q6940
1Width of
workpiece
mm800120015002000250030004000
2Size of inlet
opening
mm800*
1600
1200*
400
1500*
400
2000*
400
2500*
800
3000*
800
4000*
400
3Length of
workpiece
mm1200-
12000
1200-
6000
1200-
12000
1200-
12000
3000-
12000
2400-
12000
4500-
18000
4Roller speedm/min0.5-40.5-40.5-50.5-40.5-4.50.5-42-8
5Thickness
of plate
mm3-603-601.5-603-603-603-1104.5-110
6Abrasive flow
rate
kg/min8*1204*2504*2506*2506*2506*3608*360
7Abrasive initial
fill
kg40004000400045004500800011000
8Adjusting height
of rolling brush
mm400200350450600850900
9Ventilation capacitym3/h22000175601900019550277582805038000
10Total power of shot
blast machine
(no dust collector)
kw9078.3113.6156.6224.55204.829

Brief introduction:

It is developed for the derusting and painting treatment of steel plate, steel profiles and structural parts used for ships, automobiles, locomotives, bridges, engineering machines and so on, It could be tailored according to customers' needs, and its work flow is mainly constituted by preheating, shot blasting, painting and drying.

Advantage:

Our steel profile shot blasting machine achieves accurate, effective paint spraying. A workpiece width measuring device is installed at the inlet of the spray booth. The PLC controls paint spraying operations of the spray gun according to the measured data. In this way, the paint squeezed out of the nozzle can be effectively sprayed onto the workpiece surface, which helps improve paint utilization.

Application:

It is a piece of shot blast equipment which can perform preheating, shot blasting, paint spraying and drying processes. It is mainly used for removing surface rust, contaminants and spraying paint onto the surface of steel boards, steel profiles and structural components in industries such as shipping, automobile, motorcycle, bridge, machinery, etc.

Detailed introduction:

As an effective steel plate preservation line, it offers reliable surface preparation solutions since it is scientifically designed and meticulously crafted.

1,blast chamber, Pre-blast room and Post-blast room

It is made from steel plate and profile steel via welding, and they take high chrome steel plate or Mn13 liners inside to protect from blasting.

2,Blasting wheel assembly

Composed of several sets blasting wheels to provide abrasive blasting to thoroughly clean the surface of workpiece

3,Abrasive reclamation system

It is primarily made up of screw conveyor, bucket elevator,shot-sand separator,pneumatic valve, abrasive delivery chute and so on.

4,Roller conveyor system

It is divided into feeding roller, pre-blast room roller, blast chamber roller, intermediate roller, post-blast room and discharging roller.

5,steel plate cleaning room

It adopts advantage cleaning unit to remove remaining abrasives from steel after shot blasting,, it also has brushing and air blowing.

Liners are rolling Mn13 steel or high chrome casting, long life.

6,Automatic painting and paint mist handling system

It consists of spray booth, spray trolley, detection device, drive mechanism, painting pump, paint mist filtration unit, harmful gas absorption unit and other parts. It can be automatical or manual. Meantime, painting pump, spray gun, spray nozzle and phototubes are all imported from abroad to ensure reliable working

7,Dust removal system

It takes threestage dedusting process to remove rust, normal dust collector, cartridge filter dust collector and others.

8,Electric control system

Siemens PLC controller, main electric components can be Siemens or CHINT.

Packaging & Shipping

Smalll parts will use brown paper, and then place into tight plywood case.

Large parts will use plastic film, and then place onto frame.

Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.