Product Categories
Call us on
+86-532-81913999
If you have any questions, please contact us
GO >>

Strip Descaling Shot Blasting Machine

Strip Descaling Shot Blasting Machine,Hot rolled stainless steel strip annealing and pickling production projects are generally carried out in the following steps: namely, annealing, cooling, mechanical phosphorus removal, acid cleaning a

Features

Hot rolled stainless steel strip annealing and pickling production projects are generally carried out in the following steps: namely, annealing, cooling, mechanical phosphorus removal, acid cleaning and leveling.

Strip Descaling is used for continuous production line, high mechanical properties and phosphorus removal of stainless steel strip. This high quality homogeneous phosphorus removal can makes subsequent chemical phosphorus acid consumption reduced, so that the metal ion in acid solution effectively reduced. Through the optimization of shot blasting machine, shot blasting capacity utilization, can obtain very high to scale efficiency, so as to ensure the uniformity of the surface quality of steel strip to be processed. When the mill stainless steel strip annealing and pickling line is an important part, installed at the back of the phosphorus breaking machine, ahead of the pickling bath.

Capacity and unit parameters

Production capacity

Annual production capacity of 500000 tons

Unit parameter

Wear rate: 5 ~ 15m/min

Inlet section speed: 5 ~ 120m/min

Process section speed: 5 ~ 60m/min

Exit section speed: 5 ~ 120m/min

Process segment acceleration: +0.133m/s2

Process segment reduction: -0.133m/s2

Technology segment: -0.26m/s2

Basic functions and technical requirements of equipment

The basic function requirements of shot blasting machine

Must meet under the maximum production speed strip descaling requirements to ensure that after shot peening on the surface of the steel strip without residual iron scale, no dust, Sa2.5 cleanliness, surface roughness Ra is less than or equal to 2.5 mu m.

Dust emission standard, lower than 20mg/m3

Provide unit speed and steel, the width variation of polishing head current implementation of closed-loop control mathematical model and the relevant control requirement and detailed functional specifications

Provide detailed instructions for fault display, alarm and self diagnostic function

Provide a detailed description of the angle of automatic adjustment of the width of different steel belts

Provide detailed description of different steel steel projectile speed regulation

Separate sand blasting machine

Two dust removal in the room

The dust removal system adopts the bag type, and contains the requirements for the dust removal, (35000m3/h), the design of an effective fire system.

2.7.2 steel shot blasting machine transmission requirements

AC drive, throwing head motor with AC frequency conversion motor

Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
QINGDAO KNNJOO MACHINE INC.